The average American resides in a home that has two full bathrooms. If you happen to be one of these lucky homeowners, you’ve most likely installed a septic system. If you want to keep your septic system in optimal condition, you must make sure you know the meaning of red light on a septic system.
Below, we’ll be going over the meaning of a red light on septic system. We’ll give some tips on where to turn if a red light appears on your system.
What Does a Red Light on a Septic System Mean?
If you have a red light on your septic system, it typically means that there is a problem with the way your system is designed or that something is blocking the flow of sewage. A red light on a septic system typically indicates that the system is full and needs to be emptied. If the light is blinking, it may indicate that there is a system malfunction.
Why Does the Level of Water Increase?
A red light on your septic system usually indicates that the level of water in the tank is too high. The level of water in a septic tank may increase for a variety of reasons. Below are some of the common factors that are causing the water to rise.
The Tank Is Full
When the tank is full, it means that the septic system is no longer able to process the wastewater and it needs to be emptied. This is often indicated by a red light on the control panel.
The System Is Not Being Used Enough
If you have a family of four, for example, and you are only flushing the toilet once a day, the water level will slowly rise. Eventually, it will reach the point where it overflows into the leach field and starts to saturate the ground. This can cause serious problems, so it’s important to have the system pumped out every few years.
There Is a Broken Float Switch
The float switch is responsible for turning the septic system on and off, so when it is broken, the septic system will not work properly. If this is the case, keep on reading and look here now for a septic expert to help you with your septic problems.
How to Avoid a Red Light on Your Septic System
There are a few things that you can do in order to avoid having a red light on your system. First, you should make sure that you have the correct amount of bacteria in your system. Too much or too little bacteria can cause problems with the way the system breaks down sewage.
Also, you should make sure that the water level in your system is correct. If the water level is too high or too low, it can cause the system to malfunction.
Learn More on What a Red Light on Septic System Means
Now that you know what a red light on septic system means, it is important to take action immediately. This typically indicates that there is a problem with the system and it needs repair.
If you do not take action, you could be at risk for serious health problems or environmental damage. Contact a professional septic system service provider to assess the situation and make the necessary repairs.
Did you find this article helpful? Check out the rest of our blogs!